The terms used to describe the mechanical properties of material is very valuable. Which of the terms below would be described as "The breakdown of a material due to chemical reactions with its surroundings ."?
There are several different techniques for cold bending pipe. Which of the techniques below would best be described as "The tube is clamped against a stationary bend die and the pressure die sweeps the tube around the bend die to form the bend."?
The terms used to describe the mechanical properties of material is very valuable. Which of the terms below would be described as "The materials ability to withstand rapidly changing strains over a period of time."?
All fire protection piping must have a specific label affix to it. Which of the answers below correctly identifies the proper colour coding for this type of label
There are two different types of pipe bending, cold and hot. Which of the materials below would not be able to be bent with both methods?
There are two different types of pipe bending, cold and hot. Which of the materials below would not be able to be bent with both methods?
Plastic piping has different additives that impart a number of different properties. Which of the answers below would speed or slow the cure time?
There are numerous WHIMIS classifications in the petrochemical industry. Which of the classes below pose little danger unless mishandled?
There are three main classifications for the properties of materials. Which of the classifications below could best be defined as "the properties of a material affected by pressure and heat"?
There are several time sensitive steps when joining FRP pipe joints. Which of the answers below correctly identifies the maxium length of time in which a prepared bonding surface must be used?
Plastic piping has 5 accepted methods for sizing designations. Which of the sizing methods below would be used for plastic piping that will be connected with a flare fitting to copper tube?
Plastic piping has different additives that impart a number of different properties. Which of the answers below would contain milled glass?
FRP piping can be manufactured by a variety of methods. Which of the answers below correctly identifies the method that would use biaxial winding to produce FRP piping??
There are three main classifications for the properties of materials. Which of the classifications below could best be defined as "The behavior of materials under applied loads"?
There are several different ways that corrosion can affect a piping system. Which of the methods of corrosion below would be the most commonly encountered type of corrosion in a metal piping system?
Bends in a piping system have an adverse effect on the flow.
It is important to understand the dynamics of a fluid in piping systems. Which of the the answers below would have the greatest amount of friction energy loss?
FRP fittings can be manufactured by a variety of methods. Which of the answers below correctly identifies the method that uses a a wet mixture of chopped glass, fillers and resin to produce FRP fittings?
Plastic piping has several varieties, each with its own characteristics. Which of the answers below would be an approved method of joining PP pipe?
Proper layout of a piece of pipe to be bent is critical to a successful bend. Which of the answers below correctly identifies the number of parts that are marked out in a pipe bend layout?
Plastic piping has several varieties, each with its own characteristics. Which of the answers below would not be used to join PE pipe?
Bending pipe has several advantages over multiple joints being made. Which of the type of bending below only occurs 100°F below the materials critical temperature?
Plastic piping has 5 accepted methods for sizing designations. Which of the sizing methods below would be used for PE piping that will be connected to a metal flange?
There are several ways of joining FRP piping. Which of the answers below would be the most inexpensive joining method for FRP piping?
Plastic piping has several varieties, each with its own characteristics. Which of the answers below would have lower tensile strength, but increased stiffness, due to fillers?